Would love to make it, but I dont' think I can get this heap back togather in time!
This started out as a plan to swap the engine, sortof got out of control....
What I started with....
Now after complete disassembly... (still have to remove the windshield before repaint)
Repainted the engine bay, some seam welding while there, new steering rack, will replace front suspension w/ Bilstein race coilovers from MM and put in a MM strut tower brace I picked up cheap...
Adding ATL fuel cell I had from another project, adding some more bars and gussets to the cage.... MM panhard, rear Koni DA coilovers and tri-link going in, as well as the rear LCA's I took off the FFR with rod ends on the axle end....
Installing the Kirkeys I took out of the FFR, gutted the dash, will fabricate a gauge panel, etc..
The engine on the left came out of the car (coolant in oil, etc...
) the engine on the right is the one going in...
It's a 306 w/ forged pistons/rods, AFR 185 heads, mighty demon 650 on top, full length headers, and a custom solid roller camshaft from jay allen @ camshaftinnovations.com ....
My goal is to get it finished in time for Olthoffs event in May....
