slow turn signal

[JPO]

My turn signals "blink" too slow. I have switched out the capacitor but get the same result?? Anyone know what would cause this?

JPO

[Scott Harrison]

Check all the bulbs, one may be burned out or loose.

[tim-in-oakton]

If you replaced one of the bulbs with a dimmer bulb, there will be less current to cause the blinker to blink

[Rob Burton]

may need a heavy duty flasher. 

[Darren]

Does it do it on both turn signals & hazard warning? Reason is they use separate relays so you can eliminate certain areas right there. Any reduction in load on the relay will cause the problem you have - blown/loose bulb, low wattage as has already been mentioned. If you have LED bulbs in that will cause it as well. I replaced all my bulbs with LED's and just used off the shelf Electronic LED relay's from Autozone - cost around $10 each i think. No more flasher problems